Automatic chip testing machine is a machine that automatically tests ICs. A tray of ICs is manually placed on two fixed platforms on either side. After pressing the start button, the nozzles on both sides simultaneously pick up ICs from the tray (roll) according to a pre-set quantity and order, then place them into the corresponding test fixtures. The nozzles press down and begin testing. After testing, the nozzles pick up defective ICs and discard them in a defective IC box, while OK ICs are returned to their original positions on the tray. This cycle repeats to test the entire tray (roll) of ICs, and the entire process is automated.

1. High Efficiency: Maximum capacity 1000pcs/H (specific capacity depends on the test content)
2. Precision: Precise testing, automatic rejection of defective ICs, automatic placement of good ICs
3. Compatibility: DDR2, DDR3, DDR4, DDR5

The labeling machine uses a belt conveyor to feed products randomly. The machine senses the product, takes a picture via a vision camera, the feeder peels off the label, the suction nozzle picks up the label and automatically applies it, and finally, the product is automatically unloaded.

1. High Efficiency: Maximum capacity 1K/H
2. Precision: Precise vision gripping and application, application accuracy ±0.2mm
3. Compatibility: Compatible with various labels such as fans, mice, and keyboards
4. Operation: Simple operation, quick model switching

The double-sided mat bonding machine adopts a dual-station bonding method. The mats are fed by a belt conveyor, flow to the bonding position for fixation, and then automatically photographed by a vision camera. A feeder peels off the mats, and dual suction heads pick them up. The mats are then visually corrected and bonded to the corresponding positions. A flipping mechanism flips the mats to bond the other side, and finally, the product is automatically unloaded.

1. High Efficiency: Maximum capacity 600 pieces/hour
2. Precision: Precise visual grasping and bonding, bonding accuracy ±0.2mm
3. Advantages: Suitable for products requiring bonding on both sides

The double Y screw fastening machine adopts a simultaneous feeding and production method to improve efficiency. The product is placed in the fixture and automatically fastened. After fastening, the product is sent back to the production line.

1. High Efficiency: Maximum capacity 500 pieces/hour (1800 screws/hour)
2. Compatibility: Suitable for bases of various electronic devices such as mice and keyboards
3. Operation: Simple operation, quick machine switching

The Double Y-type Foot Pad applicator uses a simultaneous material feeding and production process to improve efficiency. The product is placed in a fixture, and an image is captured by a vision camera for automatic bonding. After bonding, the product is returned to the production line.

1. High Efficiency: Maximum capacity 550 pieces/hour (2000 foot pads/hour)
2. Precision: Precise vision-based gripping and bonding, bonding accuracy ±0.2mm
3. Compatibility: Suitable for bases of various electronic devices such as mice and keyboards
4. Operation: Simple operation, quick machine switching